環保在線>產品庫>泵-主分類>油泵>潤滑油泵>>圓弧齒輪油泵,增壓油泵,噴射燃油泵,潤滑油泵

圓弧齒輪油泵,增壓油泵,噴射燃油泵,潤滑油泵

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱湖南通大自動化供水設備
品牌
型號
所在地長沙市
廠商性質生產廠家
更新時間2024/12/2 11:14:02
訪問次數53

產品標簽:

在線詢價收藏產品點擊查看電話

索取相關資料

公司介紹主營產品

　長沙華都供水設備有限公司位于長沙市天心區產業園，是湖南省*定點企業，擁有*的生產工藝和*的科技力量。本公司具有多年生產歷史，主要產品均已通過國家質量監督檢驗中心的檢驗，各項性能指標全部合格。特別是近年來不斷吸收國內外的*科研成果，產品的性能、質量已經達到國內*水平，先后取得了ISO9001質量管理體系認證、CCC證、GS認證和多項技術、國家重點推廣項目。

華都供水主要從事供水設備的研發、制造、銷售，產品主要包括變頻恒壓供水設備、無負壓供水設備、箱式無負壓供水設備、氣壓供水設備、消防供水設備、無塔供水設備、深井供水設備、變頻控制柜等。產品適用于高樓供水、加壓泵站、賓館酒店熱水循環、小區改造、水廠自動化系統、管道直飲水、中水處理、農村安全飲水工程，工礦企業供水等。

我公司本著“市場如水、企業似舟、質量是舵、人為舵手”的經營理念，堅持“以品質求生存，以創新求發展，以管理求效益”，追求精益求精、產品齊全，以較大限度地滿足各行業、各層次用戶的不同需求，為客戶提供售前、售中、售后的全面服務。在未來，華都供水也將有選擇性的進入相關領域，助力中國機械產業的蓬勃發展，力爭成為中國機械領域的*企業！

展開顯示更多內容

水泵及供水設備

產品簡介在線詢價

產品分類：油泵產品名稱：圓弧齒輪油泵,增壓油泵,噴射燃油泵,潤滑油泵流量范圍：Q=0.6～50m3/h 揚程范圍：壓力0.6Mpa 輸送溫度：-2......

圓弧齒輪油泵,增壓油泵,噴射燃油泵,潤滑油泵產品信息

產品概述：

YCB系列圓弧齒輪泵YCB SERIES CIRCULAR ARC GEAR PUMP

用途

■在輸油系統中可作傳輸、增壓泵。

■在燃油系統中可作輸送、加壓、噴射的燃油泵。在一切工業領域中,均可作潤滑油泵用。

■Application:

This pump can be used as a transfer and booster pump in oil delivery systems. It can also be used as a fuel pump for delivery, pressurization, and injection in fuel systems. It can be used as a lubricating oil pump in all industrial fields.

適用范圍

■適用于輸送不含固體顆粒和纖維、無腐蝕性,溫度不高于80℃.粘度為5~1500cSt的潤滑油或性質類似潤滑油的其它液體,本系列另有精鑄不銹鋼材質,適用于腐蝕性介質。

結構特點

■該齒輪采用具有水平的新技術一雙圓弧正弦曲線齒型。它與漸開線齒輪相比,的優點是齒輪嚙合過程中齒廓面沒有相對滑動,所以齒面無磨損、運轉平衡、無困液現象,噪聲低.壽命長、效率高。該泵擺脫了傳統設計的束縛,使得齒輪泵在設計、生產和使用上進入了一個新的領域。

■泵設有差壓式安全閥作為超載保護,安全閥全回流壓力為泵額定排出壓力的1.5倍,也可在允許排出壓力范圍內根據實際需要另行調整。但是此安全閥不能作減壓閥長期工作,需要時可在管路上另行安裝。

■該泵軸端密封設計為兩種形式;一種是機械密封,一種是填料密封,用戶可根據使用要求選擇。

■Application:

This gear pump is suitable for conveying lubricating oil or other liquids with similar properties, with a viscosity of 5~1500cSt, which do not contain solid particles, fibers, or have no corrosiveness. The series also has precision cast stainless steel material, which is suitable for corrosive media. The temperature should not exceed 80℃.

■Structural Characteristics:

This gear adopts a new technology with an international advanced level of a double circular arc sine curve tooth profile. Compared with the involute gear, the most prominent advantage is that there is no relative sliding between the tooth profile surfaces during gear meshing, so the tooth surface has no wear, runs smoothly, and has no trapped liquid phenomenon, low noise, long life, and high efficiency. The pump breaks away from the constraints of traditional design, making gear pumps enter a new field in design, production, and use.

■The pump is equipped with a differential pressure safety valve as overload protection. The full reflux pressure of the safety valve is 1.5 times the rated discharge pressure of the pump and can be adjusted separately within the allowed discharge pressure range according to actual needs. However, this safety valve cannot work as a pressure reducing valve for a long time and can be installed separately on the pipeline when needed.

■The shaft end seal of the pump is designed in two forms: mechanical seal and packing seal. Users can choose according to their requirements.