燃氣油加熱器
Fuel gas oil temp control unit(Fuel gas heat conducting oil furnace)
特 點
Features
節能省電，運行成本低；無須復雜的水處理設備，節約水資源，可替代水資源分
缺地區以水為介質的鍋爐供熱。
Save energy, low running costs, do not need complex water treatment
equipment, save water resource, can alternative water heating boiler
in water resource sub-shortage areas.
控溫精確：供熱穩定，可進行精確的溫度調節，自動化程序高。
Precise temperature control; stable heating, precise temperature
adjustment, automation.
熱效率高：采用閉路循環供熱，無廢熱排放，負荷適應性好，在不同工況條件下
均能保持熱效率，綜合熱利用效率較高。
High thermal efficiency; closed-cycle heating, no waste heat emission,
load adaptability, can maintain op0timum thermal efficiency under
different conditions, high integrated thermal utilization efficiency.
安全可靠：具有完備的運行控制和安全監控裝置。供熱系統開口運行，安全系數高。
Safe and reliable: complete operating control and safety monitoring device.
Heating system runs Opening, high safety factor.
高溫低壓：能在較低的運行壓力下，獲得較高的工作溫度。
High-temp and low pressure: can obtain a higher working temperature under
lower operating pressure.
選用國際燃燒器和*的全自動控制系統使鍋爐燃燒更穩定、操作更方、
運行更安全可靠。
Well-known international brａnd burners and advanced automatic control system,
the boiler combustion more stable, operation more convenient, safe and reliable.
爐膛采用雙密排盤tp0，受熱面布置充足，降低管子表面熱負荷，合導熱油使用更安全。
Furnace with double row pipe, heating surface is sufficient to reduce the heat
load of the pipe surface, the Heat-conducting oil use safe.
介質流程合理，導熱油由低（進口）至高（出口），運行產生的氣體很難在爐內停留，
可方便地排出系統。
Reasonable medium flow, thermal oil from the low (inlet) to high (outlet),
generated gas can not stay in the furnace, the system can be easily discharged it.
爐膛尺寸與燃燒火焰相匹配，采用了正壓燃燒，輻射換熱交率高。
The furnace size matches with the burning flame, positive pressure combustion
increase the radiation heat transfer efficiency.