產品名稱: CLS2型電容式物位開關
產品型號: CLS2
自動校準型,可防物料堆積
介質:液體,粉末或散裝物料.
接液材質:316 SS 和 Kynar® (PVDF).
溫度限制: 環境: -40 ~ 185°F (-40 ~ 85°C), -4 ~ 185°F (-20 ~ 85°C) 電源為 24 VAC/DC 的時候; 過程: -40~ 250°F (-40 ~ 121°C).
壓力限制: 365 psi (25 bar).
封裝: 防水, NEMA 4X, 或防爆 Class I, Groups B, C, and D; Class II, Groups E, F and G.
開關類型: DPDT (2個 form C).
額定電氣: 8A @ 120/240 VAC res., 30 VDC. 1/2 hp @ 120 VAC and 1/4 hp @ 240 VAC ind.
電源: 12 ~ 240 VAC/DC; 24 ~ 240 VAC/DC.
能耗: 2.8 Watts max.
電氣連接端: 1/2" NPT conduit opening, screw termination and removable terminal block.
過程連接: 3/4" 外螺紋 NPT.可選 1", 1-1/2" 外螺紋 NPT; 3/4", 1", 1-1/2" BSP; 1", 1-1/2", 2" 衛生型.
安裝方向:垂直或水平.
設定調節: Trips when product touches probe. Cut or extend probe to length of desired trip point. Can be cut as short a 1" and can be extended by welding on to probe. (Minimum length will be effected by material being sensed.)
反應時間: 0.2s.
時間延遲: 可調, 0 ~ 60s.
火花/靜電保護: 10 MEG Ohm 火花間隙阻抗. 浪涌電流 100A max.
靈敏度: 8 種可選, 1, 2, 4, 6, 8, 10, 14, 20 pF (at 30 pF nominal free capacitance)
接液材質:316 SS 和 Kynar® (PVDF).
溫度限制: 環境: -40 ~ 185°F (-40 ~ 85°C), -4 ~ 185°F (-20 ~ 85°C) 電源為 24 VAC/DC 的時候; 過程: -40~ 250°F (-40 ~ 121°C).
壓力限制: 365 psi (25 bar).
封裝: 防水, NEMA 4X, 或防爆 Class I, Groups B, C, and D; Class II, Groups E, F and G.
開關類型: DPDT (2個 form C).
額定電氣: 8A @ 120/240 VAC res., 30 VDC. 1/2 hp @ 120 VAC and 1/4 hp @ 240 VAC ind.
電源: 12 ~ 240 VAC/DC; 24 ~ 240 VAC/DC.
能耗: 2.8 Watts max.
電氣連接端: 1/2" NPT conduit opening, screw termination and removable terminal block.
過程連接: 3/4" 外螺紋 NPT.可選 1", 1-1/2" 外螺紋 NPT; 3/4", 1", 1-1/2" BSP; 1", 1-1/2", 2" 衛生型.
安裝方向:垂直或水平.
設定調節: Trips when product touches probe. Cut or extend probe to length of desired trip point. Can be cut as short a 1" and can be extended by welding on to probe. (Minimum length will be effected by material being sensed.)
反應時間: 0.2s.
時間延遲: 可調, 0 ~ 60s.
火花/靜電保護: 10 MEG Ohm 火花間隙阻抗. 浪涌電流 100A max.
靈敏度: 8 種可選, 1, 2, 4, 6, 8, 10, 14, 20 pF (at 30 pF nominal free capacitance)
特點:
自動校準: 只需按一下校準按鈕,即可自動校準. 無須打開封裝,外部磁體激活校準
通用電源: 電源范圍寬達 12 ~ 240 VAC/DC,無須跳線設定.
鍍膜防護: 不受粘稠附著物影響.
失敗保護設定: 失電輸出可設定為常開或常閉.
狀態指示: 超亮紅色 LED用于開關狀態指示.
時間延遲: 預防濺潑物料報警
可移動端子:易于接線