201液位控制器為長期可靠的用于化工廠、煉油廠、其它工業場合中而設計，不銹鋼開關采用重力返回技術從而代替彈簧來延長使用壽命。標準配置是全天候防護，重載、焊接的浮子外室可在
技術指標
介質：可兼容性液體
材質：外室：鑄鋼或可選擇316SS
浮子及內部組件：303SS、304SS、316SS和430SS、可選擇316SS和430SS或全為316SS
溫度范圍：過程：750°F（399℃）。對水銀開關，過程溫度高于500°F（260℃）時，對快速開關，過程溫度高于400°F（204℃）和密封快速過程溫度高于350°F（176.7℃）應配有散熱片。
壓力范圍：100°F（37.7℃）時600psig(41bar)、750°F（399℃）時500psig(34bar),可用更高級別。
防護指標：NEMA 4X?？蛇x通用型或防爆型。
可重復性：±1/4"（6.4mm）
開關類型：單刀雙擲快速開關、密封開關或水銀開關，可選擇雙刀雙擲或雙態
電氣指標：快速開關：12A@120VAC, 5 A@240VAC，0.5A@125VDC；密封快速開關：5A@125VAC, 5 A@240VAC，5A@30VDC；水銀開關：12A@120VAC/DC, 2A@240VAC/DC，可選更高級別接觸點的水銀開關
電氣連接：旋緊接線端
導管連接：3/4"FNPT內螺紋
工藝連接：1"FNPT內螺紋和1"孔焊接；可選擇法蘭連接
安裝定位：垂直
設定點調節：±1"（25.4 mm）
重量：33 lb(14.97kg)
機構認證：UL 和CSA
比重：最小0.6
型號表
| 型號 | 開關類型 |
| 201-WT-7810-C1-60 | 快速 SPDT |
| 201-WT-7810HM-C1-60 | 全密封、快速 SPDT |
選型表 – 201系列
| EXAMPLE | 201 | WT | 7810 | 10 | HF | C1 | 60 |
| 201-WT-7810-60 Liquid Level Control, welded carbon steel chamber, weatherproof enclosure, SPDT snap switch, fixed deadband, automatic reset, side/bottom process connections, combination 1" NPT/socket weld hubs, minimum specific gravity 0.60, operating pressure 600 psig (51 bar) at100°F(38°C), 500 psi (34 bar) at750°F(400°C). |
|
|
| ENCLOSURE |
| G |
|
|
|
|
|
| General purpose, NEMA 1 | UL | CSA |
|
| WT |
|
|
|
|
|
| Weatherproof, NEMA 3R, 4, 4X. | UL |
| |
|
| E |
|
|
|
|
|
| Explosion-proof, NEMA 7, 9, Class I Groups B, C, D, Class II Groups E, F, G (CSA approved Groups C, D, E, F, G only). | UL | CSA | |
|
| EV |
|
|
|
|
|
| Explosion-proof, vapor proof, NEMA 7, 9, Class I Groups B, C, D, Class II Groups E, F, G (CSA approved Groups C, D, E, F, G only). | UL | CSA | |
| CIRCUITS |
|
| 48XX |
|
|
|
|
| Single stage, mercury switch, see chart A. |
|
|
|
|
| 48XX | XX |
|
|
|
| Two stage, mercury switch, see chart A. |
|
| |
|
|
| 78XX |
|
|
|
|
| Single stage, snap switch, see chart B. |
|
| |
|
|
| 78XX | XX |
|
|
|
| Two stage, snap switch, see chart B. |
|
| |
|
|
| 78XXHM |
|
|
|
|
| Hermetically sealed snap switch, see chart B. |
|
| |
|
|
| 98XX |
|
|
|
|
| Single stage, high capacity DC snap switch, use heat fins (HF) if process temperature exceeds350°F(177°C), do not exceed450°F(232°C), see chart B. |
|
| |
|
|
| 98XX | XX |
|
|
|
| Two stage, high capacity DC snap switch, use heat fins (HF) if process temperature exceeds350°F(177°C), do not exceed450°F(232°C), see chart B. |
|
| |
|
|
| 10XX |
|
|
|
|
| Single stage, high temperature snap switch, continuous rating800°F(425°C), see chart B, 201-C1-60 type rated 500 psi (34 bar), 201-C1-75 type rated at 650 psi (45 bar). |
|
| |
|
|
| 10XX | XX |
|
|
|
| Two stage, high temperature snap switch, continuous rating800°F(425°C), see chart B, 201-C1-60 type rated 500 psi (34 bar), 201-C-75 type rated at 650 psi (45 bar). |
|
| |
| WELDED CHAMBER CONSTRUCTION COMBINATION 1" NPT/SOCKET WELD HUBS |
|
|
|
|
|
|
|
| Refer to chart C below for pressure/temperature ratings. |
|
|
|
|
|
|
|
| C1 |
|
| Carbon steel body. |
|
| |
| 201 |
|
|
|
| C1 | 60 |
| Minimum specific gravity 0.60 side/bottom process connections, combination 1" NPT/socket weld hub. | UL | CSA | |
| 201 |
|
|
|
| C1 | 75 |
| Minimum specific gravity 0.75 side/bottom process connections, combination 1" NPT/socket weld hub. | UL | CSA | |
| WELDED CHAMBER CONSTRUCTION WITH FLANGED PROCESS CONNECTIONS |
|
|
|
|
|
|
|
| Refer to chart C below for pressure/temperature ratings. |
|
|
| 203 |
|
|
|
| C1 | 160 |
| 1" 150# flanges side/bottom process connection. | UL | CSA | |
| 203 |
|
|
|
| C1 | 175 |
| 1" 150# flanges side/bottom process connection. | UL | CSA | |
| 203 |
|
|
|
| C1 | 360 |
| 1" 300# flanges side/bottom process connection. | UL | CSA | |
| 203 |
|
|
|
| C1 | 375 |
| 1" 300# flanges side/bottom process connection. | UL | CSA | |
| 203 |
|
|
|
| C1 | 660 |
| 1" 600# flanges side/bottom process connection. | UL | CSA | |
| 203 |
|
|
|
| C1 | 675 |
| 1" 600# flanges side/bottom process connection. | UL | CSA | |
| 204 |
|
|
|
| C1 | 160 |
| 1" 150# flanges side/side process connection. | UL | CSA | |
| 204 |
|
|
|
| C1 | 175 |
| 1" 150# flanges side/side process connection. | UL | CSA | |
| 204 |
|
|
|
| C1 | 360 |
| 1" 300# flanges side/side process connection. | UL | CSA | |
| 204 |
|
|
|
| C1 | 375 |
| 1" 300# flanges side/side process connection. | UL | CSA | |
| 204 |
|
|
|
| C1 | 660 |
| 1" 600# flanges side/side process connection. | UL | CSA | |
| 204 |
|
|
|
| C1 | 675 |
| 1" 600# flanges side/side process connection. | UL | CSA | |
| OPTIONS |
|
|
|
| HF |
|
|
| High temperature fins, should be considered if ambient temperature exceeds500°F(260°C) for extended periods. |
|
|
|
|
|
|
|
|
|
| 12 | Breather and drain for E type explosion-proof enclosure. Recommended for high humidity or outdoor service. |
|
|
CHARTS A & B - ELECTRICAL CIRCUITS AND RATINGS
| SWITCH TYPE | SWITCH ACTION | ELECTRICAL RATINGS IN AMPS | ORDERING CODE |
|
| ||||||
| AC | DC | SINGLE STAGE | TWO STAGE | ||||||||
| 120V | 240V | 440V | 125V | 250V | LOWER | UPPER | |||||
| CHART A | SP-ST open on level FALL | 10 | 5 | 3? | 10 | 5 | -4821 | -4821 | -21 | UL | CSA |
| SP-ST open on level RISE | 10 | 5 | 3? | 10 | 5 | -4820 | -4820 | -20 | UL | CSA | |
| SP-DT one switch | 4 | 2 | 1? | 4 | 2 | -4810 | -4810 | -10 | UL | CSA | |
| SP-DT two switches E.I.* | 10 | 5 | 3? | 10 | 5 | -4815 | -4815 | -15 | UL | CSA | |
| DP-ST two switches E.I.* open on level FALL | 10 | 5 | 3? | 10 | 5 | -4813 | -4813 | -13 | UL | CSA | |
| DP-ST two switches E.I.* open on level RISE | 10 | 5 | 3? | 10 | 5 | -4814 | -4814 | -14 | UL | CSA | |
| DP-DT two SP-DT switches | 4 | 2 | 1? | 4 | 2 | -4806 | -4806 | -06 | UL | CSA | |
| CHART B | SP-DT one switch | 12 | 5 | 3? | 0.5** | 0.25** | -7810 | -7810 | -10 | UL | CSA |
| DP-DT Two SP-DT switches | 12 | 5 | 3? | 0.5** | 0.25** | -7806 | -7806 | -06 | UL | CSA | |
| SP-DT one hermetically sealed switch*** | 5 | 5 |
| 5**
|
| -7810HM | -7810HM | -10HM |
|
| |
| DP-DT two hermetically sealed SP-DT switches*** | 5 | 5 |
| 5**
|
| -7806HM | -7806HM | -06HM |
|
| |
| DP-DT two SP-DT switches | 10 | 3 |
| 10? | 3? | -9806 | -9806 | -06 |
|
| |
| SP-DT one switch | 10 | 3 |
| 10? | 3? | -9810 | -9810 | -10 |
|
| |
|
| DP-DT two SP-DT switches | 2 | 2 |
| 0.4** | 0.25** | -1006 | -1006 | -06 |
|
|
|
| SP-DT one switch | 2 | 2 |
| 0.4** | 0.25** | -1010 | -1010 | -10 |
|
|
?Available on special order, change 1st digit in ordering code from 4 to 5 or 7 to 8, i.e., -4820 becomes -5820, -7810 becomes -8810, etc.
?10 amp inductive (polarized) at 125 VDC.
*Electrically Independent.
**Resistive.
***30VDC = 5 resistive.
CHART C
| SERIES | MOUNTING STYLE | MINIMUM SPECIFIC GRAVITY | PRESSURE RATING AT | FLANGE CLASS (psi) | ORDER CODE | |
| 38°C | 400°F | |||||
| 201 | 1" NPT | 0.6 | 600 psi | 500 psi | -- | C1-60 |
| 201 | 1" NPT | 0.75 | 1000 psi | 750 psi | -- | C1-75 |
| 203 | FLANGED | 0.6 | 275 psi | 100 psi | 150 | C1-160 |
| 203 | FLANGED | 0.75 | 275 psi | 100 psi | 150 | C1-175 |
| 203 | FLANGED | 0.6 | 600 psi | 425 psi | 300 | C1-360 |
| 203 | FLANGED | 0.75 | 720 psi | 425 psi | 300 | C1-375 |
| 203 | FLANGED | 0.6 | 600 psi | 500 psi | 600 | C1-660 |
| 203 | FLANGED | 0.75 | 100 psi | 750 psi | 600 | C1-675 |
水銀產品現在不能進口
