產品型號:JSH3704B石油產品半自動開口閃點和燃點測定器(克利夫蘭開口杯法)
產品名稱:閃點(開口),石油產品半自動開口閃點和燃點測定器(克利夫蘭開口杯法)(JSH3704B)
產品說明:
JSH3704B石油產品半自動開口閃點和燃點測定器(克利夫蘭開口杯法) 一、符合GB/T3536、ASTM D92、ISO2592標準 二、主要技術參數: 檢測范圍: 80~400℃ 加熱功率: 300W 點火氣體: 液化石油氣和煤氣 冷卻方式: 強制風冷 工作電源:AC220V±10% 50HZ 三、性能及特點: 1、采用自動控制加熱速率。 2、采用點火開關手動點火測試,點火器由電機驅動,該電機正反方向轉動帶動點火桿做相應轉動,使試驗火焰穩定地掃過試驗杯上方。 3、采用風冷方式對試驗完畢后的油樣進行冷卻。 JSH3704B petroleum products semi-automatic open flash point and ignition point tester(Cleveland Open Cup method)
I. Comply with GB/T3536, ASTM D92, ISO2592 standards Ii. Main Technical parameters: Detection range: 80 ~ 400℃ Heating power: 300W Ignition gas: LIQUEFIED petroleum gas and gas Cooling method: forced air cooling Power supply: AC220V±10% 50HZ Iii. Performance and Characteristics: 1. Automatic control of heating rate. 2. Manual ignition test is carried out by using the ignition switch. The igniter is driven by the motor, which rotates the ignition rod in the positive and negative direction to make the test flame sweep the top of the test cup steadily. 3. The oil samples after the test are cooled by air cooling. |